Best Motorcycle

How to paint your motorcycle exhaust black?

The motorcycle exhaust gets the best shape and new look when the black paint covers the motorcycle exhaust. With the best adhesion properties, motorcycle paint is one of the best ways to make the exhaust of the bike clean and fresh.

How to paint your motorcycle exhaust black? You can paint your motorcycle exhaust black by clean the exhaust, remove the old paint, mix the paint, and apply the paint on the motorcycle exhaust. You can use silicon spray paint for the painting of the motorcycle exhaust.

If you are a biker and you can give a fresh and new look to your bike then you have no idea how much the paint can give a new and warm look to your motorcycle exhaust.

Motorcycle exhausts have this tendency that they can get a layer of rust on them. That is why it is really important to spray paint the motorcycle exhaust.

How to paint your motorcycle exhaust black?

The market is full of many paints that can be used for the painting of the motorcycle exhaust. These paints are various in their number. If there is damage in the bike then the paint has the power to cover the exhaust of the bike.

When it comes to the maintaining of the bike’s exhaust the first thing which comes in the mind is the use of paint. There are paints that contain silicone coating. This spray paint is temperature resistant and that means the spray can withstand the highest temperature.

There is another painting which is known as Temperature metallic stove paint. This is one of the best paint which is available in the market for motorcycle exhausts. This paint is very heat and temperature resistant.

That is why it does not melt when the heat strokes the exhaust of the bike. There are many other paints available in the market for the painting of the motorcycle exhausts. These paints are reasonable and very effective for the exhausts of the motorcycle.

There is a complete need for maintaining the problem of the rusting on the motorcycle exhaust. When you find out that there is rust on the pipes for the exhaust. Then instead of thinking that you should change the pipes. You must just paint the pipes.

The paint which is used for the painting of the pipes of the exhaust not only helps in removing the rust from the top of the bike. But it also helps in cleaning the exhaust. The exhaust of the motorcycle looks so clean and amazing. The paint can give a completely new look at the exhaust of the motorcycle.

Tools required

When it comes to the painting of the exhaust of a motorcycle. Then it is very clear then you are going to need some tools and equipment. Although the process of painting the exhaust of the motorcycle is not very easy on the same side it is not very difficult. You can spray-paint the exhaust of your motorcycle at your home.

This is very convenient for you as well. For the purpose of painting the exhaust of a motorcycle, there are some tools that are required. Without these tools, you cannot paint the exhaust of the motorcycle. 

So before buying the paint for the motorcycle exhaust make sure that you have a complete set of these tools at your home or working garage. The first thing is the cleaning of the parts for this purpose you must have the cleaners at your place before starting the painting of the exhaust of the motorcycle. Many people add locks near the exhaust to keep their bikes safe from being stolen.

The cleaners are available at the auto stores. These are never in the shortage when it comes to cleaning the parts. The cleaners should be there for brake parts and carb and choke cleaner. Then you must have the paint for the painting of the exhaust of the motorcycle. These paints are also available in auto stores. 

These paints are affordable and heat resistant. There must be sandpaper in your access which will help the drying of the paint after completion of the whole procedure. You must have a grinder of the cable as well. So that you can remove the old paint. Then you must also have the cardboard box and wire grinder. These tools are essential before you start the painting of the motorcycle exhaust. 

Cleaning the exhaust

The first step before you start the painting of the exhaust of the motorcycle is cleaning. For this purpose, you need a fiber-free cloth. Make sure the fiber-free cloth is dry. The cloth should be clean.

This cloth can be used for the cleaning of the rust parts and dirt which exists on the exhaust of the motorcycle. The dirt can be removed by using the fiber-free cloth. The reason behind using a fiber-free cloth is that while cleaning and rubbing the pipes of the motorcycle’s exhaust there should not be any kind of more fibers sucked in the holes. The fiber-free cloth will provide the maximum cleaning of all the pipes of the exhaust fan. 

Remove the old paint

The cleaning fo the exhaust of the motorcycle can be done by keeping the exhaust on the bike. But when it comes to the removal of the old paint from the exhaust of the motorcycle. Then there is a need to just separate the parts of the exhaust from the motorcycle. Make sure that you have removed all the parts from the motorcycle.

After removing the parts place the parts and pipes on a specific surface which is clean and smooth. This is the very first thing when you want to remove the old paint which already exists on the motorcycle.

Now there is a need to remove the old paint or the paint which already exists on the pipes of the exhaust. Mostly the old paint on the motorcycle exhaust is also of black color. 

You cannot remove and clean the old paint from the surface of the motorcycle exhaust by just scratching and washing the paint from the pipes of the exhausts of the motorcycle. For removing the paint you need proper tools and equipment.

These tools will help you to remove the paint from the surface for the exhausts of the motorcycle in a very convenient way. The name of the tool which you can use for the removal of the old paint from the surface of the motorcycle exhaust is called the cable grinder cup. This equipment will help you to remove the old paint from the exhaust and all the pipes which include in the system. 

Moreover, there is not only the use of the cable grinder cup for the removal of old paint. But there is also the assembling of the cable grinder cup in the angle grinder. These grinders will help you to grind off all the paints from the exhaust of the motorcycle.

 The tools are so good in their functioning that the cutting off of the paint becomes so easy. Then paint can be removed from the surface of the exhaust in the form of patches. Then after removing the first layer of the paint from the motorcycle exhaust, you can use the wire grinder cup.

This wire grinder cup usually used for the smooth removal of the paint from the exhaust of the motorcycle. This grinder can remove all the remaining particles of the rust from the pipers of the exhaust and thus you can remove every single bit by using the grinder.

Then you can blow off and sand out all the other remaining particles and bits of paint which remains on the surface of the motorcycle exhaust.

Now when the cleaning of the old paint is complete then you can also apply the brake cleaner on the pipes of the exhaust of the motorcycle. The brake cleaner has this ability that it can evaporate. This not only evaporates by solely but it also takes away all the remaining bits of the paint on the surface of the exhaust.

This will give a good finish look to the exhaust of the motorcycle. The outer sides of the exhaust pipe can be cleaned by using the brake cleaner. You can also spray some other cleaners which might include the carb cleaner on the exhaust fan. After applying all types of cleaners you can use a rag to clean all the remaining bits from the surface of the motorcycle exhaust.

Mixing of paint

In this step, you can just take the paint of your choice. The color of the paint will be obviously the black color. If you want to paint through brushes then you can take out the paint on a metal plate and can mix two to three paints on that plate.

In the case of spray paints, you can add one paint in the second paint bottle. Mix the paint thoroughly and carefully. Even the first motorcycle in America had black exhausts.

Painting the motorcycle exhaust black

Now in this step, you can place all the pipes of the exhaust of the motorcycle on the cardboard. The cardboard is used in the step for the smooth and pale placement of the pipes. Then after placing the parts of the exhaust on the cardboard start the process of spraying the paint on the pipes. The spraying of the paint should be proper.

There should not be any kind of streaks n the pipes. If you find out that there are some streaks then try to paint the pipes again. While painting the pipes of the motorcycle’s exhaust make sure that once you paint the one side of the exhaust and then the other side. You can leave the pipes overnight. 

Moreover, there must not be an extra coating of the paint on the pipes. Otherwise, the layers will form the volume which is not good for the exhaust. While painting the motorcycle exhaust you can sweep the nozzle of the spray paint. The nozzle should be a sweep in the length direction. The lengthy direction should be thin and complete. It should cover the whole surface without leaving any kind of patches.  

Do not use your hands while using the paint for the exhaust. The hands can form patches on the surface of the exhaust. This can be harmful while painting. Then make sure that both the sides are completely covered by the paint.

After that, you can use a rag for the smoothness on the surface of the exhaust. You can again form a layer of the paint on the pipes of the motorcycle exhaust. After the painting of the exhaust then you can reassemble the parts on the bike again. You should replace motorcycle seat foam before painting the seat covers.

Allow the paint to dry

If you are now thinking to place the exhaust of the motorcycle back into the bike. Then make sure that all the pipes are completely dry. If the paint is not dried completely obviously there are chances that the paint will get off.

You will use your hands for the placement and assembly of all the pipes of the exhaust. That is why the hands and fingers will form patches on the wet paint. There is no confirmation that which area of the exhaust pipes will get affected.

For the confirmation that the exhaust and all the pipes of the motorcycle exhaust will remain clean and smooth. Try to give some time to the pipes so that they can be dried completely. For the dryness of the paint which is on the pipes of the motorcycle exhaust, you can leave the pipes on the cardboard.

You can leave the pipes on the cardboards for a whole night. If the paint required more time than a night then leave the pipes for more time. In this way, the paint will be completely dried.

After this makes sure that the paint is dry touch the side of the pipe in the corner. This is the way to check the dryness or wetness of the paint. Then you can fit the pipes and exhaust back in the motorcycle.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close